UCFL 200 (SFT); UCFLX 200 (MSFT) & UCFL 300 Series
The UCFL 2 bolt flange unit (RHP SFT and MSFT series) consists of a bearing insert with a spherical outer diameter in a cast iron housing. The bearing is usually fixed to the shaft by means of two set screws in the extended portion of the inner ring.
Click here for catalogue info covering housing dimensions and relevant inserts
UCFL 200 Series UC200 inserts (= RHP SFT Series) / Setscrew locking collars
UCFLX Series UCX inserts (= RHP MSFT Series) / Setscrew locking collars
UCFL 300 series UC300 inserts / Setscrew locking collars
If you are more familiar with RHP Self-Lube numbers you should download this NSK-RHP catalogue extract.
End Caps
TR housings from size 204 to 208 are available machined to take the TR END CAPS with either inch or metric inserts. The end caps are NOT suitable for the standard TR housings and cannot be retrofitted.
We also have stock of a number of RHP Self lube bearings with plastic end caps.
General Operation Limitations
Flange units are suited to applications in which static misalignment of up to 2deg must be overcome, but are not well suited to high speed, dynamic misalignment applications where an internally aligning bearing sytem should be used.
Operating temperature range -20 to +100 Celsius. At temperatures above 70 Celsius grease degradation should be considered as the limiting factor. High temperature units are available.
The limiting speed is dependent upon the quality of shaft used (See Technical section).
Bearings with eccentric locking collars
The UCFL 200 series is available with inserts featuring eccentric locking collars - TR designation SAFL2G series or RHP SFT -EC series
Bearings with tapered bore and adapter sleeves
Both the UCFL 200 and UCFL 200 Series are available with inserts featuring a tapered bore and supplied with and adapter sleeve for positive shaft locking on inch and metric sizes up to 60mm.
If you are more familiar with RHP Self-Lube numbers you should download this NSK-RHP catalogue extract
For further information contact OEM Sales by phone on 01952 222300 or e-mail OEM or Trade Sales by phone on 01952 222400 or e-mail Trade