UCFC (MFC) Round Flange Units
The UCFC (MFC) series round flange unit has a spigot in the rear of the casting that fits into a suitably toleranced hole in the mounting plate.
CARE MUST BE TAKEN WHEN CHANGING FROM ONE BRAND TO ANOTHER AS THIS SPIGOT DIMENSION CAN CHANGE SLIGHTLY IN SOME CASES!
UCFC 2 Series (TR)
UCFCX Series (Made by TR for NBC group to FYH dimension plan)
If you are more familiar with RHP Self-Lube numbers, download this NSK-RHP Catalogue extract
General operation limitations
Round flange units are suited to applications in which static misalignment of up to 2 deg must be overcome, but are not well suited to high speed, dynamic misalignment applications where an internally aligning bearing system should be used.
Operating temperature range from -20 to +100 Celsius. At temperatures above 70C, grease degradation should be considered as a limiting factor. High temperature units are available.
Bearings with tapered bore and adapter sleeves
The UCFC 200 Series is available with inserts featuring a tapered bore and supplied with an adapter sleeve for positive shaft locking on inch and imperial shaft sizes up to 80mm
UKFC 2 Series (TR)
UKFCX Series
For more information contact OEM Sales on 01952 222300 or e-mail OEM; Trade Sales on 01952 222400 or e-mail Trade