80mm Solid Series 25 (External gear)
SEG25 Series Solid Section External Gear
A modular series of rings with relatively large gear module and wide geared ring, offering maximum gear capacity in a small diameter slewing ring. High shear forces are catered for by the pilot diameters, thus reducing the shear force to be carried by the bolts.
The 80SLS25 Series datasheet HERE
INDIVIDUAL PDF FILES
SEG 900 25 SEG 1000 25 SEG 1100 25 SEG 1200 25 SEG 1300 12 SEG 1400 25
SEG 1500 25 SEG 1600 25
Will be made available on request
All bearings manufactured in 42CrMo4 for superior gear strength
All bearings supplied with 4 grease points in the outer ring only, DIN 71412A M8x1 equispaced
Consider the GreaseMax Auto lubricators to ensure optimum relubrication in service
Load and bolt limit curves
Bearings should operate within the prescribed triangular load area at all times.
The bolt limit curve is based on the use of Grade 10.9 bolts.
If the load is suspended, or the axis of rotation is not vertical, refer the application details to firstname.lastname@example.org
This information offers generally accepted interchange numbers. However, variations exist and all queries should be referred to our Technical Department for analysis.
Dimensional equivalence does not always imply equal performance!
This information offers generally accepted interchange numbers. However variations exist and all queries should be referred to our Technical Department for analysis.
In the search for continuous product improvement this information is subject to change without notice.
For professional assistance contact the NBC Slewing ring experts by phone on +44 (0)1952 222300, by fax on +44 (0)1952 242938 or e-mail email@example.com